|
|
 |
2167 - 6" Joint
This is the bracket that connects the top or bottom rails as well as joins the top seats and allow the top seat cover to connect as well as the vertical. This is for a 6" frame only. Color is irrelevant.
|
|
|
|
|
|
 |
2173 - 7" Joint
This is the bracket that connects the top or bottom rails as well as joins the top seats and allow the top seat cover to connect as well as the vertical. This is for a 7" frame or an 8" frame. Color is irrelevant. Notice the "U" shaped dimple on the joint. If your pool doesn't have this, you may need a 6" joint. THIS IS ON BACKORDER, WE ARE HOPING FOR A LATE MAY 2010 ARRIVAL
|
|
|
|
|
|
 |
2175 - 9" Joint
This is the bracket that connects the top or bottom rails as well as joins the top seats and allow the top seat cover to connect as well as the vertical. This is for a 9" frame. Color is irrelevant.
|
|
|
|
|
|
 |
2191 - 10 Joint
OUT OF STOCK, EXPECTING LATE MAY 2010 ARRIVAL........This is the bracket that connects the top or bottom rails as well as joins the top seats and allow the top seat cover to connect as well as the vertical. This is for a 10" frame. Color is irrelevant. This part is made out of plastic.
|
|
|
|
|
|
 |
3177 - Resin Side Upper Joint
This is only for Oval Pools. This is the joint used at the top of the vertical only along the straight sides of the oval pool. Some pools may use a steel version of this part.
|
|
|
|
|
|
 |
3172 - Steel Upper Side Joint
This is for Oval Pools only, this part fits at the top of the vertical along the straight side of an oval pool.
|
|
|
|
|
|
 |
3233 -Lower Side Joint (5/8" rails)
This part is used at the bottom of the vertical along the straight side of an oval pool only. This part is designed to accomodate a 5/8" wide rail at the bottom. This is only used on 6" Steel models of pools. Not very common.
|
|
|
|
|
|
 |
3222 - Lower Side Joint (1" rails)
This part is used at the bottom of the vertical along the straight side of an oval pool only. This part is designed to accomodate a 1" wide rail at the bottom. This is used on 7" - 10" Resin and Steel models of pools. Most common.
|
|
|
|
|
|
 |
2181 - Freedom Upper Joint
This joint is made out of Resin, so it will not rust. It is designed to fit on the top of the Freedom Series vertical.
|
|
|
|
|
|
 |
2182 - Freedom Lower Joint
This Joint is made out of Resin so it will not rust. It is designed to fit on the bottom of the Freedom Series vertical.
|
|
|
|